Link each circuit to comparable measurements and an identified reference.
Assign an ID to each circuit and record inlets, outlets and an existing authorized diagram. Do not disconnect lines to complete the map.
Define the comparison and its documented conditions. Identify mold, machine, fluid, process state and the source of the reference.
Record instrument locations and identities. Copy available flow, temperature and pressure readings with units, times and reading conditions.
Compare only data with sufficient context. Mark changes in circuit, measurement point, fluid or operating phase; retain original readings.
Link differences to observations, evidence and pending review. Tests or interventions need their specific procedure and authorization.
Fictional example
FICTIONAL: circuit DEMO-C2, diagram revision B. Record A: 5.0 L/min; record B: 4.6 L/min. Both identify instrument F2, but B was taken during startup and A during documented production. The comparison is marked conditional; no blockage is declared and no cleaning is prescribed.
Fill in the fields in your browser. “Save completed copy” downloads an HTML file with your entries: reopen it to keep editing. “Print / PDF” lets you print or save your entries as a PDF through the print dialog. There is no autosave; save again after each change and before closing. No data is sent to VYRCO.
Use
Free for professional use and personal or internal adaptation. Retain VYRCO attribution and label changes. Do not resell or redistribute a modified version as an original VYRCO resource.
Sources
DME · CoolingCare · Reference for recording and comparing cooling circuit condition; equipment settings are not generalized.
DME · FloSense · Context for identifying and tracking cooling variables; no universal acceptance criteria.